Kyocera KM-2030 Fax System (B) Instruction Handbook - Page 87
Remote Switching
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Remote Switching Remote Switching lets you initiate fax reception from a telephone that is connected to this fax machine. This function is thus convenient if you want to be able to initiate fax reception from a location separate from the fax machine itself. Section 4 Other Features of this Fax * Remote Switching is only possible if a separately purchased telephone with tone dialing capabilities is connected to this fax machine. (1) Changing the Remote Switching Number The factory default setting for the Remote Switching Number is "55", but you can change this if you want. * If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. 1. Raise the cover plate and press the Register key. Program: End Á Program Abbreviated Dial Program 1-Touch Key Program: End Á Program abbreviated dial Program one-touch key (Inch) (Metric) 2. Use the cursor up or the cursor down key to select "Program Fax Parameter". Program: Program encryption box Program Encryption ID Á Program Fax Parameter (Inch) P Program: Encryp. code box regist. Program encryption code Á Program fax parameter P (Metric) 3. Press the Enter key. Program Fax Parameter: End Á v: Own Name : 4. Use the cursor up or the cursor down key to select "Remote Switch". Program Fax Parameter: Permit ID No. Fax Forwarding Á Remote Switch :55 P P (Inch) Program fax parameter: Permit number Fax forwarding Á Remote switch :55 P (Metric) P 5. Press the Enter key. Remote Switch:55 Enter Remote Switching No. Remote switch:55 Enter remote switching number (Inch) (Metric) 6. Use the keypad to enter the new Remote Switching Number (2 digits). * If you want to reset the displayed number to "00", simply press the Stop/Clear key. Remote Switch:11 (Inch) Enter Remote Switching No. Remote switch:11 (Metric) Enter remote switching number 7. Press the Enter key. Registration of the new Remote Switching Number is complete. * Press the Reset key. The operation panel will return to the initial mode settings. (2) Operation When you want to initiate fax reception from a telephone that is connected to this fax machine, perform the following procedure. 1. When a call comes in, the telephone will ring. 2. Pick up the telephone receiver. 3. If you hear a fax tone, use the tone signal capabilities of the telephone to enter the 2-digit Remote Switching Number. * The factory default setting for the Remote Switching Number is "55". 4. The connection will switch to the fax machine and fax reception will start automatically. 4-5