Netgear GS724TPv2 User Manual - Page 108

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 12. From the Ingress Filtering menu, select one of the following options: • Enable. The frame is discarded if this port is not a member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the port VLAN ID specified for the port that received this frame. • Disable. All frames are forwarded in accordance with the 802.1Q VLAN bridge specification. The default is Disable. 13. In the Port Priority field, specify the default 802.1p priority assigned to untagged packets arriving at the port. You can enter a number from 0 to 7. 14. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable fields on the page. Table 21. PVID Configuration information Field Current Ingress Filtering Untagged VLANs Tagged VLANs Description Displays whether ingress filtering is enabled for the interface. The number of untagged VLANs for the interface. The number of tagged VLANs for the interface. Configure a Voice VLAN You can configure the parameters for a voice VLAN configuration.  To configure a voice VLAN: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. Configure Switching 108