Netgear GS724TPv2 User Manual - Page 314
System Setup and Maintenance Settings - firmware upgrade
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Table 60. General feature default settings (continued) Feature Name/Setting 802.1p to Queue Mapping (802.1p -> Queue) Queue Minimum Band Width Queue Scheduler Type Auto-VoIP, Protocol-Based Admin Mode Prioritization Type Auto-VoIP Traffic Class Auto-VoIP, OUI-Based Admin Mode Auto-VoIP VLAN OUI-based priority Default 0 -> 1 1 -> 0 2 -> 2 3 -> 3 4 -> 4 5 -> 5 6 -> 6 7 -> 7 0 Weighted Disabled Traffic Class 7 Disabled 0 7 System Setup and Maintenance Settings The following table describes the system setup and maintenance settings. Table 61. System setup and maintenance settings Feature Boot code update DHCP/manual IP System name configuration Configuration save/restore Firmware upgrade Restore defaults Dual image support Factory reset Sets Supported 1 1 1 1 1 1 (web and front-panel button) 1 1 Default N/A DHCP enabled/192.168.0.239 NULL N/A N/A N/A Enabled N/A Specifications and Default Settings 314