Netgear GS724TPv2 User Manual - Page 182

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 8. From he Accounting Mode menu, select to disable or enable RADIUS accounting on the server. The default is Disabled. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable information on the page. Table 42. RADIUS Configuration information Field Current Server Address Number of Configured Authentication Servers Description The address of the current server. This field is blank if no servers are configured. The number of configured authentication RADIUS servers. The value can range from 0 to 32. Configure a RADIUS Authentication Server on the Switch You can view and configure various settings for a RADIUS server configured on the switch. Add a Primary RADIUS Authentication Server to the Switch  To add a primary RADIUS authentication server to the switch and view the RADIUS authentication server statistics: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Management Security > RADIUS > Server Configuration. Manage Device Security 182