Netgear GS724TPv2 User Manual - Page 308
Switch Default Settings
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Switch Default Settings The following table describes the switch default settings. Table 59. Switch default settings Feature IP address Subnet mask Default gateway Protocol Management VLAN ID Minimum password length IPv6 management Mode SNTP client Global logging RAM logging Persistent (FLASH) logging DNS SNMP Traps Auto Save RMON TACACS+ RADIUS SSL Denial of service protection Dot1x authentication (IEEE 802.1X) MAC-based port security Access control lists (ACL) Protected ports Line blocking prevention Advertised port speed Broadcast storm control Default 192.168.0.239 255.255.255.0 192.168.0.254 DHCP 1 Eight characters None Disabled Enabled Enabled (Severity level: debug and above) Disabled Enabled (No servers configured) Enabled Enabled Enabled Not configured Not configured Disabled Disabled Disabled All ports are unlocked Not configured None Disabled Maximum capacity Disabled Specifications and Default Settings 308