Netgear GS724TPv2 User Manual - Page 76

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Configure LLDP-MED Port Settings You can enable LLDP-MED mode on an interface and configure its properties.  To configure LLDP-MED settings for a port: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > LLDP > Advanced > LLDP-MED Port Settings. The LLDP-MED Port Settings page displays. 6. From the Port menu, select the port to configure. 7. Use the following menus to enable or disable the following LLDP-MED settings for the selected port: • LLDP-MED Status. The administrative status of LLDP-MED on the interface. When LLDP-MED is enabled, the transmit and receive function of LLDP is effectively enabled on the interface. • Notification. When Notification is enabled, the port sends a topology change notification if a device is connected or removed. • Transmit Optional TLVs. When Transmit Optional TLVs is enabled, the port transmits the following optional type length values (TLVs) in the LLDP PDU frames: - MED Capabilities - Network Policy - Location Identification - Extended Power via MDI: PSE - Extended Power via MDI: PD - Inventory 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure System Information 76