Netgear GS724TPv2 User Manual - Page 136
Go To Interface, Admin Mode, Disable, Enable, Host Timeout, Max Response Time, MRouter Timeout
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 7. From the Admin Mode menu, select Disable or Enable. This specifies the interface mode for the selected interface for IGMP snooping for the switch. The default is Disable. 8. In the Host Timeout field, specify the time that the switch must wait for a report for a particular group on a particular interface before it deletes that interface from the group. Enter a value between 2 and 3600 seconds. The default is 260 seconds. 9. In the Max Response Time field, specify the time that the switch must wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value between 1 and 25 seconds. The default is 10 seconds. The configured value must be less than the value in the Host Timeout field. 10. In the MRouter Timeout field, specify the time that the switch must wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero indicates an infinite time-out, that is, no expiration. 11. From the Fast Leave Mode menu, select whether fast leave mode is enabled. The option are Enable and Disable. The default is Disable. 12. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Switching 136