Netgear GS724TPv2 User Manual - Page 22
Use a Web Browser to Access the Switch and Log In, Interface Naming Conventions
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Use these links as follows: • To display all ports, click the 1 link. • To display all LAGs, click the LAG link. • To display all ports and LAGs, click the All link. The procedures in this section describe how to select the ports and LAGs to configure. The procedures assume that you are already logged in to the switch. If you do not know how to log in to the switch, see Use a Web Browser to Access the Switch and Log In on page 16. To configure a single port by using the Go To Interface field: 1. Ensure that the page is displaying all ports, and not only the LAGs. 2. In the Go To Interface field, type the port number, for example g3. For more information, see Interface Naming Conventions on page 21. 3. Click the Go button. The check box associated with the interface is selected, the row for the selected interface is highlighted, and the interface number appears in the heading row. 4. Configure the desired settings. 5. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. To configure a single LAG by using the Go To Interface field: 1. Click the LAG link or the All link to display the LAGs. 2. In the Go To Interface field, type the LAG number, for example l3. For information, see Interface Naming Conventions on page 21. 3. Click the Go button. The check box associated with the interface is selected, the row for the selected interface is highlighted, and the interface number appears in the heading row. Get Started 22