Netgear GS724TPv2 User Manual - Page 34

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 b. In the EUI64 menu, select True to enable the Extended Universal Identifier (EUI) flag for IPv6 address, or select False to omit the EUI flag. c. Click the Add button. 10. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. View the IPv6 Network Neighbor You can view information about the IPv6 neighbors that the switch discovered through the network interface by using the Neighbor Discovery Protocol (NDP).  To view the IPv6 Network Neighbor Table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > IPv6 Network Neighbor. The following table describes the information the IPv6 Network Neighbor page displays about each IPv6 neighbor that the switch discovered. Table 4. IPv6 network interface neighbor table information Field IPv6 address MAC address Description The IPv6 address of a neighbor switch visible to the network interface. The MAC address of a neighbor switch. Configure System Information 34