Netgear GS724TPv2 User Manual - Page 149
Switching > Address Table > Basic > Address Table, Search by MAC Address
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Address Table > Basic > Address Table. 6. Use the Search menu and field to search for a MAC address, VLAN ID, or interface number: • Search by MAC Address. From the Search menu, select MAC Address, and enter the 6-byte hexadecimal MAC address in two-digit groups separated by colons, for example, 01:23:45:67:89:AB. Then click the Go button. If the address exists, that entry is displayed as the first entry followed by the remaining (higher) MAC addresses. An exact match is required. • Search VLAN ID. From the Search menu, select VLAN ID, and enter the VLAN ID, for example, 100. Then click the Go button. • Search Interface. From the Search menu, select Interface, and enter the interface ID using the respective interface naming convention (for example, g1 or l1). Then click the Go button. The following table describes the nonconfigurable information on the page. Table 36. MAC Address Table information Field Total MAC Address MAC Address VLAN ID Description The number of total MAC addresses learned or configured. A unicast MAC address for which the switch holds forwarding and/or filtering information. The format is a 6-byte MAC address that is separated by colons, for example 01:23:45:67:89:AB. The VLAN ID associated with the MAC address. Configure Switching 149