Netgear GS724TPv2 User Manual - Page 116
Display the Auto-VoIP Status, Password, Switching > Auto-VoIP > Auto-VoIP Status, Update
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Display the Auto-VoIP Status You can display the Auto-VoIP status. To view the Auto-VoIP status: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Auto-VoIP > Auto-VoIP Status. 6. To refresh the page with the latest information about the switch, click the Update button. The following table describes the nonconfigurable Auto-VoIP status information on the page. Table 22. Auto-VoIP status information Field Auto-VoIP VLAN ID Maximum Number of Voice Channels Supported Number of Voice Channels Detected Description The Auto-VoIP VLAN ID. The maximum number of voice channels supported. The number of VoIP channels prioritized successfully. Configure Switching 116