Netgear GS724TPv2 User Manual - Page 124
View Rapid STP Information, To view information about RSTP, Password
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Table 25. CST port status (continued) Field CST Regional Root CST Path Cost Port Forwarding State Description Bridge identifier of the CST regional root. It is made up using the bridge priority and the base MAC address of the bridge. Path cost to the CST regional root. The forwarding state of this port. View Rapid STP Information You can view information about the status of the Rapid Spanning Tree (RSTP) port. To view information about RSTP: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > STP > Advanced > RSTP. The Rapid STP page displays. The following table describes the Rapid STP status information on the page. Table 26. Rapid STP status information Field Interface Role Mode Fast Link Status Description The physical or port channel interfaces associated with VLANs associated with the CST. Each MST bridge port that is enabled is assigned a port role for each spanning tree. The port role is one of the following: Root Port, Designated Port, Alternate Port, Backup Port, Master Port, or Disabled Port. Specifies the spanning tree operation mode. Different modes are STP, RSTP, and MSTP. Indicates whether the port is enabled as an edge port. The forwarding state of this port. Configure Switching 124