Netgear GS724TPv2 User Manual - Page 141

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 • Snooping Querier IP Address. Enter the snooping querier IP address to be used as the source address in periodic IGMP queries. This address is used when no address is configured on the VLAN on which a query is being sent. • IGMP Version. Specify the IGMP protocol version used in periodic IGMP queries. The range is 1 to 2. The default is 2. • Query Interval(secs). Specify the time interval in seconds between periodic queries sent by the snooping querier. The query interval must be a value in the range of 1 and 1800. The default is 60. • Querier Expiry Interval(secs). Specify the time interval in seconds after which the last querier information is removed. The querier expiry Interval must be a value in the range of 60 and 300. The default is 125. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure IGMP Snooping Querier for VLANs You can configure IGMP queriers for use with VLANs on the network.  To create a new VLAN ID for IGMP snooping: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Multicast > IGMP Snooping Querier > Querier VLAN Configuration. 6. From the VLAN ID menu, select New Entry. Configure Switching 141