Netgear GS724TPv2 User Manual - Page 50

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 The following table displays the nonconfigurable information on the page. Table 9. Daylight Saving (DST) Status information Field Daylight Saving (DST) Begins At Ends At Offset (in Minutes) Zone Daylight Saving (DST) in Effect Description The Daylight Saving value, which is one of the following: • Disable • Recurring • Recurring EU • Recurring USA • Non Recurring Displays when the daylight saving time begins. This field is not displayed when daylight saving time is disabled. Displays when the daylight saving time ends. This field is not displayed when daylight saving time is disabled. The offset value in minutes.This field is not displayed when daylight saving time is disabled. The zone acronym. This field is not displayed when daylight saving time is disabled. Displays whether daylight saving time is in effect. Configure Denial of Service Settings You can configure Denial of Service (DoS), allowing the switch to classify and block specific types of DoS attacks. Configure Auto-DoS The Auto-DoS Configuration page lets you automatically enable all the DoS features available on the switch, except for the L4 Port attack. For information about the types of DoS attacks the switch can monitor and block, see Configure Denial of Service on page 51.  To enable the Auto-DoS feature: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. Configure System Information 50