Netgear GS724TPv2 User Manual - Page 138

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Table 33. IGMP Snooping Table information (continued) Field Description Interface Description The text description of this multicast table entry. Possible values are Management Configured, Network Configured, and Network Assisted. The list of interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the associated address. Configure IGMP Snooping for VLANs  To configure IGMP snooping settings for VLANs: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Multicast > IGMP Snooping > IGMP Snooping VLAN Configuration. When you create a VLAN, the VLAN is automatically added to the IGMP Snooping VLAN Configuration page. 6. Configure the IGMP snooping values: • Admin Mode. Enable or disable IGMP snooping for the specified VLAN ID. The default is Disable. • Fast Leave Mode. Enable or disable the IGMP snooping fast leave mode for the specified VLAN ID. The default is Disable. Configure Switching 138