Netgear GS724TPv2 User Manual - Page 60
Con the PoE Port Settings, Password, System > PoE > Advanced > PoE Port Configuration
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 The following table describes the nonconfigurable fields on the page. Table 12. PoE Configuration fields Field Firmware Version Power Status Nominal Power Threshold Power Watts Consumed Power Watts Description The firmware version of the PoE firmware component. The power status. The maximum amount of power in watts that the switch can deliver to all ports. If the consumed power is below the threshold power, the switch can power up another port. The consumed power can be between the nominal and threshold power. The threshold power is displayed in watts. The total amount of power in watts that is being delivered to all ports. Configure the PoE Port Settings You can configure PoE settings for individual PoE ports. To configure the PoE port settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > PoE > Advanced > PoE Port Configuration. Configure System Information 60