Netgear GS724TPv2 User Manual - Page 51

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 The default password is password. The System Information page displays. 5. Select System > Management > Denial of Service > Auto-DoS Configuration. The Auto-DoS Configuration page displays. 6. Next to Auto-DoS Mode, select the Enable radio button. When an attack is detected, a warning message is logged to the buffered log and is sent to the syslog server. At the same time, the port is shut down and can be enabled only manually by the admin user. 7. Click the Apply button. The updated configuration is sent to the switch, and configuration changes take effect immediately. Configure Denial of Service You can select which types of DoS attacks the switch monitors and blocks.  To configure individual DoS settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Denial of Service > Denial of Service Configuration. Configure System Information 51