Netgear GS724TPv2 User Manual - Page 271
View the trap logs and clear the counters, Password, Monitoring > Logs > Trap Logs, Clear
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 View the trap logs and clear the counters: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Monitoring > Logs > Trap Logs. 6. To clear all counters, click the Clear button. All statistics for the trap logs are reset to their default values. The following table describes the nonconfigurable information on the page. Table 57. Trap Logs information Field Description Number of Traps Since Last The number of traps that occurred since the switch last rebooted. Reset Trap Log Capacity The maximum number of traps stored in the log. If the number of traps exceeds the capacity, the entries overwrite the oldest entries. Number of Traps since log last viewed The number of traps that occurred since the traps were last displayed. Displaying the traps by any method (terminal interface display, web display, upload file from switch, and so on) causes this counter to be cleared to 0. Log The sequence number of this trap. Monitor the System 271