Netgear GS724TPv2 User Manual - Page 119
Con CST Settings, Password, Switching > STP > Advanced > CST Configuration
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Table 23. STP configuration status (continued) Field Root Port Max Age (secs) Forward Delay (secs) Hold Time (secs) CST Regional Root CST Path Cost Description Port to access the designated root for the CST. The maximum age timer controls the maximum length of time in seconds that passes before a bridge port saves its configuration BPDU information. The derived value of the Root Port Bridge Forward Delay parameter. Minimum time in seconds between the transmission of configuration BPDUs. Priority and base MAC address of the CST regional root. Path cost to the CST tree regional root. Configure CST Settings You can configure Common Spanning Tree (CST) and Internal Spanning Tree on the switch. To configure CST settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > STP > Advanced > CST Configuration. Configure Switching 119