Netgear GS724TPv2 User Manual - Page 72

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > LLDP > Basic > LLDP Configuration. 6. To configure nondefault values for the following LLDP properties, specify the following options: • TLV Advertised Interval. The number of seconds between transmissions of LLDP advertisements. • Hold Multiplier. The transmit interval multiplier value, where transmit hold multiplier × transmit interval = the time to live (TTL) value that the device advertises to neighbors. • Re-initializing Delay. The number of seconds to wait before attempting to re-initialize LLDP on a port after the LLDP operating mode on the port changes. • Transmit Delay. The minimum number of seconds to wait between transmissions of remote data change notifications to one or more SNMP trap receivers configured on the switch. 7. To configure a nondefault value for LLDP-MED, enter a value in the Fast Start Duration field. This value sets the number of LLDP packets sent when the LLDP-MED fast start mechanism is initialized, which occurs when a new endpoint device links with the LLDP-MED network connectivity device. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure System Information 72