Netgear GS724TPv2 User Manual - Page 67
Delete an SNMP Recipient, System > SNMP > SNMP V1/V2 > Trap Configuration, Apply, Password
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 The System Information page displays. 5. Select System > SNMP > SNMP V1/V2 > Trap Configuration. The Trap Configuration page displays. 6. Select the check box next to the recipient. 7. Update the desired fields. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Delete an SNMP Recipient To delete an SNMP trap recipient: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > SNMP > SNMP V1/V2 > Trap Configuration. The Trap Configuration page displays. 6. Select the check box next to the recipient to remove. 7. Click the Delete button. The trap recipient is removed. Configure System Information 67