Netgear GS724TPv2 User Manual - Page 201

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 The updated configuration is sent to the switch. Configuration changes take effect immediately. 9. To refresh the page with the latest information about the switch, click the Update button. The following table describes the nonconfigurable information on the page. Table 43. Access profile configuration profile summary Field Rule Type Service Type Source IP Address Mask Priority Description The action performed when the rules are matched. The service type chosen. The policy is restricted by the service type chosen. Source IP address of the client originating the management traffic. The subnet mask of the IP Address. The priority of the rule. Configure Access Rule Settings You can add security access rules. You can apply changes to an access rule only when the access profile is in a deactivated state. Note: You must create an access profile before you can add rules.  To configure the access rule settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Security > Access > Access Control > Access Rule Configuration. Manage Device Security 201