Netgear GS724TPv2 User Manual - Page 175

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 7. From the Policy Name menu, select a policy name. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the nonconfigurable information on the page. Table 40. Service Interface Configuration information Field Direction Operational Status Description Shows that the traffic direction of this service interface is In. Shows the operational status of this service interface, either Up or Down. Remove a DiffServ Policy From an Interface  To remove a DiffServ policy from an interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select QoS > DiffServ > Advanced > Service Configuration. The Service Interface Configuration page displays. 6. Select the check boxes that are associated with the interfaces from which you want to remove the policy. 7. From the Policy In Name menu, select None. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Quality of Service 175