Netgear GS724TPv2 User Manual - Page 131
Con Multicast, View the MFDB Table
View all Netgear GS724TPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2 Table 29. STP Statistics (continued) Field MSTP BPDUs Received MSTP BPDUs Transmitted Description Number of MSTP BPDUs received at the selected port. Number of MSTP BPDUs transmitted from the selected port. Configure Multicast Multicast IP traffic is traffic that is destined to a host group. Host groups for IPv4 multicast are identified by class D addresses, which range from 224.0.0.0 to 239.255.255.255. Host groups for IPv6 multicast are identified by the prefix ff00::/8. View the MFDB Table The Multicast Forwarding Database holds the port membership information for all active multicast address entries. The key for an entry consists of a VLAN ID and MAC address pair. Entries can contain data for more than one protocol. To view the MFDB Table: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 9. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Multicast > MFDB > MFDB Table. 6. In the Search by MAC Address field, enter a MAC address. Enter six two-digit hexadecimal numbers separated by colons, for example 01:00:5e:45:67:89. Configure Switching 131