Yamaha QL5 Reference Manual - Page 100
ASSIGN Meter OSCILLATOR OUTPUT button, Indicates the oscillator output level.
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
3 ASSIGN section Enables you to select a channel to which the oscillator signal will be sent. Press one of the three tabs below to select the type of channels displayed, and then press the button(s) for the desired channel(s) (multiple selections are allowed). The "ASSIGNED" indicator is lit green for a tab that contains a selection. You can press the CLEAR ALL button to defeat all selections. NOTE In the case of QL1, channels that do not exist on the model will not be shown. 4 Meter section Indicates the oscillator output level. 5 OSCILLATOR OUTPUT button Turns the oscillator output on or off. If you turn this button on, the oscillator signal will be sent to the input channel or bus you selected in the ASSIGN section. When you press the button again, the oscillator will turn off. Talkback and Oscillator 100 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/100.png)