Yamaha QL5 Reference Manual - Page 230

 FLANGE Two input, two output flange effect. Parameter FREQ. DEPTH MOD. DLY Range 0.05-40.00 Hz 0-100% 0.0-500.0 ms FB. GAIN -99 to +99% WAVE SYNC NOTE LSH F LSH G EQ F EQ G EQ Q HSH F HSH G Sine, Tri OFF/ON *1 21.2 Hz-8.00 kHz -12.0 to +12.0 dB 100 Hz-8.00 kHz -12.0 to +12.0 dB 10.0-0.10 50.0 Hz-16.0 kHz -12.0 to +12.0 dB Description Modulation speed Modulation depth Modulation delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Modulation waveform Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain *1.  SYMPHONIC Two input, two output symphonic effect. Parameter Range FREQ. 0.05-40.00 Hz DEPTH 0-100% MOD. DLY 0.0-500.0 ms WAVE Sine, Tri SYNC OFF/ON NOTE *1 LSH F 21.2 Hz-8.00 kHz LSH G -12.0 to +12.0 dB EQ F 100 Hz-8.00 kHz EQ G -12.0 to +12.0 dB EQ Q 10.0-0.10 HSH F 50.0 Hz-16.0 kHz HSH G -12.0 to +12.0 dB Description Modulation speed Modulation depth Modulation delay time Modulation waveform Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain *1.  PHASER Two input, two output 16-stage phaser. Parameter FREQ. DEPTH Range 0.05-40.00 Hz 0-100% FB. GAIN -99 to +99% OFFSET PHASE STAGE SYNC NOTE LSH F LSH G HSH F HSH G 0-100 0.00-354.38 degrees 2, 4, 6, 8, 10, 12, 14, 16 OFF/ON *1 21.2 Hz-8.00 kHz -12.0 to +12.0 dB 50.0 Hz-16.0 kHz -12.0 to +12.0 dB Description Modulation speed Modulation depth Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Lowest phase-shifted frequency offset Left and right modulation phase balance Number of phase shift stages Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ Low shelving filter frequency Low shelving filter gain High shelving filter frequency High shelving filter gain *1.  DYNA.FLANGE Two input, two output dynamically controlled flanger. Parameter Range SOURCE INPUT, MIDI SENSE 0-100 DIR. UP, DOWN DECAY *1 OFFSET 0-100 FB.GAIN -99 to +99% LSH F LSH G EQ F EQ G EQ Q HSH F HSH G 21.2 Hz-8.00 kHz -12.0 to +12.0 dB 100 Hz-8.00 kHz -12.0 to +12.0 dB 10.0-0.10 50.0 Hz-16.0 kHz -12.0 to +12.0 dB Description Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Decay speed Delay time offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz) 11 Data List