Yamaha QL5 Reference Manual - Page 29
GAIN/PATCH window
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
GAIN/PATCH window (1-32, 33-64/ST IN (QL5), ST IN (QL1)) This window displays the head amp settings of the corresponding input channels. Here you can also use the [TOUCH AND TURN] knob to adjust the selected head amp gain. 2 1 2 1 3 1 Parameter select buttons Switch parameters to view in the window. • ANALOG GAIN Analog gain • DIGITAL GAIN Digital gain • PATCH Patch selection 2 GC ALL ON/GC ALL OFF buttons Switch Gain Compensation on or off for all input channels simultaneously. 3 Channel select button Selects the channel. You can select multiple channels simultaneously. If you press the ANALOG GAIN parameter select button: 2 1 3 4 1 GAIN knob Indicates the analog gain setting for each channel. Press the knob to select a channel, and then control the gain value using the [TOUCH AND TURN] knob. If the Gain Compensation function is turned on, an indicator will appear, showing the position of the analog gain when the function is turned on. Input channels 2 OVER indicator Lights when a signal at the input port or from the rack output exceeds the full scale level. This indicator is available only if an input channel is selected. 3 +48V indicator Indicates the +48V on/off status for each channel. 4 Ø (Phase) indicator Indicates the phase setting for each channel. NOTE If the input channel is patched to a slot for which the connection to the head amp is not recognized, the knob 1 will be replaced with the slot/port number of the patch destination. 3 will not be displayed. If the input channel is patched to a rack, the knob 1 will be replaced with the port ID of the rack. If nothing is patched to the input channel, the knob 1 will be replaced with a dotted line "----". If you press the DIGITAL GAIN parameter select button: 2 1 3 1 GAIN knob Indicates the digital gain setting for each channel. Press the knob to select a channel, and then control the gain value using the [TOUCH AND TURN] knob. 2 OVER indicator Lights when a signal at the input port or from the rack output exceeds the full scale level. This indicator is available only if an input channel is selected. 3 Ø (Phase) indicator Indicates the phase setting for each channel. If you press the PATCH parameter select button: 1 1 PATCH button Press this button to open the PORT SELECT window, in which you can select an input port to patch to the channel. 29 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/29.png)