Yamaha QL5 Reference Manual - Page 111
Master field, Turn on the override button on the moderator's channel.
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Automixer calculates the ratio of input level for specific channels for all input mixes in the group. The following example explains the weight control mechanism. When increasing the weight setting in one channel • the value displayed in the auto mix gain meter for that channel increases, while the values for other channels are reduced. • Channels with high weight setting values receive a higher system gain than other channels. When reducing the weight setting in one channel • the value displayed in the auto mix gain meter for that channel reduces, while the values for other channels are increased. • When speaking into multiple mics at the same time, it is difficult to distinguish between different mics. If you can hear noise near one mic (example: noise from a computer ventilation fan or an air conditioner), you can suppress the noise by reducing the weight setting for that channel. 4 group Each channel can be assigned to three groups (a/b/c). This group function is convenient for the following uses. • Using multiple rooms: Assign the mics in each room to their own groups, and use a different Automixer for each. • Stereo pan: Assign mics panned to left, right and center to groups a, b, and c, to maintain a stable stereo field. 5 override If you turn on the OVERRIDE button in the master field, the channel will switch to man mode or mute mode according to the settings for that channel's override button. • When the channel's override button is on, the mode for that channel will switch to man when the master OVERRIDE button is turned on. • When the channel's override is off, the mode for that channel will switch to mute when the master OVERRIDE button is turned on. • When the master OVERRIDE button is turned off, the channel will return to its previous mode. The override function is convenient when the moderator of a panel discussion wants to control the system. Follow the instructions below to change the settings. 1. Turn on the override button on the moderator's channel. 2. Turn off the override button on all other channels. 3. Turn on the OVERRIDE button in the master field as needed. 6 Channel number Displays the channel number and channel name of the channel to be inserted. Graphic EQ, effects, and Premium Rack 7 man/auto/mute Toggles between man/auto/mute. man: Passes the audio through without changing the gain. This mode is used for singing with a mic. auto: Turns on Automixer. This mode is used for conversations. mute: Mutes channels. 8 preset Selects the channel mode (man/auto/mute) when the PRESET button in the master field is pressed. The preset button lights when a preset is programmed for a channel. Master field 1 23 1 OVERRIDE/PRESET/MUTE Makes settings for each group (a/b/c) selected in the channel control field. Shows only the selected group. • OVERRIDE When you press this button, channels where the channel override button is on will fade in to 0 dB (unity gain). All channels with the override button turned off will be muted. • PRESET When you press this button, each channel will switch to the mode indicated by the mode button (man/auto/mute) next to the lit preset indicator. When the power is turned on, each channel will be set to its preset mode. • MUTE When you press this button, all channels will fade out immediately (0.5 seconds). When you press this button, channels where the channel override button is on will fade in to 0 dB (unity gain). All channels with the override button turned off will be muted. 2 meters Switches the meter indicator in the channel control field. Toggles between gain, input, and output each time you press the button. NOTE Meters should normally be set in gain mode. 3 reset Initializes the Automixer settings. 111 Reference Manual