Yamaha QL5 Reference Manual - Page 11
Channel Strip Operations in the Channel Strip CHANNEL NAME field, GAIN/PATCH field
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Channel Strip section The Channel Strip section located below the touch screen lets you recall and control input channels, output channels, or DCA groups. If you press the Bank Select key in the Fader Bank section, you can control them using the faders, [ON] keys, and [CUE] keys for the channels or DCA groups corresponding to that key. Operations in the Channel Strip section STEP 1. Use the Bank Select keys to select the channels or DCA groups that you want to control. 2. Use the faders and [ON] keys in the Channel Strip section to adjust the level of the selected channels and switch them on or off. 3. Use the fields on the OVERVIEW screen and the [TOUCH AND TURN] knob to adjust the parameters for the channels. Bank Select keys OVERVIEW screen Channel Strip section Channel Strip section CHANNEL NAME field This field appears at the top and bottom of the screen and displays the channel number, name, and icon for the currently-selected eight channels. The name of the currently-selected channel is highlighted. : Selected channel : Unselected channel GAIN/PATCH field This field enables you to make HA (head amp) analog or digital gain settings. You can also view the operational status of the head amp. The view and the function of the controllers in this field vary depending on the type of the selected channel. If the head amp is patched: 2 1 3 4 1 GAIN knob Sets the analog gain of the head amp. • Press this field to assign the GAIN knob to the [TOUCH AND TURN] knob, which enables you to adjust the gain. If the Gain Compensation function is turned on, an indicator appears, showing the level of the signal output to the audio network. • If the GAIN knob has been assigned to the [TOUCH AND TURN] knob, press the knob to open the GAIN/PATCH 8ch window. 2 OVER indicator Lights when a signal at the input port or from the rack output exceeds the full scale level. This indicator is available only if an input channel is selected. 3 +48V indicator Indicates the phantom power (+48V) on or off status for the head amp. This indicator is not displayed unless the head amp is patched to the channel. 4 Ø (Phase) indicator (input channels only) Indicates the input phase setting for the head amp. NOTE • If the slot is not connected to the head amp, the patch and the type of the MY card will be displayed. • Press the SETUP button, then the USER SETUP button, select the PREFERENCE tab, and then set the GAIN KNOB FUNCTION to DIGITAL GAIN. You will be able to adjust the digital gain value by using the [TOUCH AND TURN] knob. 11 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/11.png)