Yamaha QL5 Reference Manual - Page 68

CH COPY MODE window This window enables you to copy channel settings. 1 4 2 3 1 SOURCE CH field Displays the copy-source channel. While this window is displayed, press a [SEL] key on the top panel to select a channel. The selected channel will be highlighted in this field. If you want to re-select the copy-source channel, press this field. If the copy source is a MIX/MATRIX channel, buttons will appear so you will be able to select parameters to copy. COPY TARGET field • MODULE PARAMETERS button Selected channel module parameters • WITH MIX SEND/WITH MATRIX SEND button SEND parameters of signals sent to the selected channel Channel Job 2 DESTINATION CHs field Displays the copy-destination channel. When you specify the copy source, you can then select a copy-destination channel (multiple selections are allowed) by pressing its [SEL] key on the panel, and this field will be highlighted. If you want to defeat all of the selected copy-destination channels, press the DESTINATION CHs field. NOTE In the case of the QL1, faders that do not exist on the model will not be shown. 3 COPY button Executes the copy operation. After selecting the copy-source channel and copydestination channel(s), press this button to execute the copy operation. 4 CLOSE button Press this button to close the window and return to the previous screen. 68 Reference Manual