Yamaha QL5 Reference Manual - Page 140
MIDI SETUP window for port selection, TERMINAL field, PORT NO. field, OK button, CH field
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
MIDI SETUP window (for port selection) Here you can select the port that will be used to transmit and receive MIDI messages. This window appears when you press the port select button for transmission (Tx) or reception (Rx) in the PORT/CH field. 1 2 MIDI MIDI SETUP window (for channel selection) This parameter row enables you to specify MIDI Channels for MIDI message transmission and reception. This window appears when you press the channel select button in the PORT/ CH field. 1 3 1 TERMINAL field Enables you to select the port that will transmit or receive MIDI messages. You can choose from the following items. NONE MIDI SLOT1 No port will be used. MIDI IN (Rx) and OUT (Tx) connectors on the rear panel A card that supports serial transmission and is installed in Slot 1 on the rear panel 2 PORT NO. field If you select SLOT 1 in the TERMINAL field, choose port number 1-8 in this field. (The number of available ports will vary depending on the card that is installed.) The currently-available card is valid only for port 1. 3 OK button Confirms the settings and closes the window. 2 1 CH field Enables you to select CH1-CH16 as the channel that will transmit or receive MIDI messages. 2 OK button Confirms the settings and closes the window. 140 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/140.png)