Yamaha QL5 Reference Manual - Page 40

OUTPUT channels This chapter explains output channels (MIX channels, MATRIX channels, STEREO channels, MONO channels). Signal flow for output channels The output channel section takes the signals sent from the input channels to the various buses, processes them with EQ and dynamics, and sends them to output ports or other buses. The following types of output channels are provided. MIX channels These channels process signals sent from input channels to MIX buses, and output them to the corresponding output port, MATRIX bus, STEREO bus, or MONO (C) bus. M O N MIX ST O MATRIX CUE 1 2 1516 L R(C) 1 2 7 8 L R MIX 1-16 To RACKIN PATCH To OUTPUT PATCH MIX INSERT OUT 1-16 INSERT POINT POST ON INSERT OUT PRE FADER INSERT OUT PRE EQ INSERT OUT MIX INSERT IN 1-16 PRE EQ METER EQ OUT METER DYNA OUT PRE FADER METER METER CUE ON GR METER LEVEL BAL INSERT 4BAND ATT EQ COMP COMPAND EXPAND INSERT ON PRE EQ POST EQ PRE EQ INSERT OUT Keyin PRE FADER INSERT OUT PRE FADER Self PRE EQ/Self POST EQ/MIX13-16 OUT/ MIX(1-8,9-16) POST EQ (PRE FADER)PFL / (POST ON)AFL MATRIX1,3...7 MATRIX2,4...8 LEVEL ON LEVEL ON PRE FADER / POST ON To MATRIX VARI POST ON METER INSERT MIX OUT1-16 POST ON IIPNNPOSSOESESRTRTTTOOOONNUUTT LEVEL ON To MATRIX PRE FADER / POST ON PAN/BAL ST L VARI STEREO PAN MODE TO ST TO MONO PAN/BAL LR MONO MONO(C) ST R TO LCR LCR CSR POST ON (13-16)To KEYIN To RACKIN PATCH To OUTPUT PATCH To MONITOR SELECT OUTPUT channels STEREO channel/MONO (C) channel Each of these channels processes the signal sent from the input channels to the STEREO bus or MONO (C) bus, and send it to the corresponding output port or MATRIX bus. If input channels are in LCR mode, the STEREO (L/R) channels and the MONO (C) channel can be used together as a set of three output channels. M O N MIX ST O MATRIX CUE 1 2 1516 L R(C) 1 2 7 8 L R STEREO L,R,MONO(C) To RACKIN PATCH INSERT POINT To OUTPUT PATCH STEREO INSERT OUT L,R,MONO(C) POST ON INSERT OUT PRE FADER INSERT OUT PRE EQ INSERT OUT STEREO INSERT IN L,R,MONO(C) PRE EQ METER EQ OUT METER DYNA OUT PRE FADER METER METER CUE ON GR METER LEVEL BAL INSERT ATT 4BAND EQ COMP COMPAND EXPAND INSERT ON PRE EQ POST EQ PRE EQ INSERT OUT Keyin PRE FADER INSERT OUT PRE FADER Self PRE EQ/Self POST EQ/MIX13-16 OUT/ ST(L,R,MONO(C)) POST EQ (PRE FADER)PFL / (POST ON)AFL MATRIX1,3...7 MATRIX2,4...8 LEVEL ON LEVEL ON PRE FADER / POST ON To MATRIX VARI LEVEL ON PAN/BAL PRE FADER / POST ON To MATRIX VARI STEREO POST ON METER INSERT STEREO OUT L,R,MONO(C) To OUTPUT PATCH To MONITOR SELECT POST ON POST ON INSERT OUT MATRIX channel These channels process the signals sent from input channels, MIX channels, and STEREO/ MONO channels to MATRIX buses, and send them to the corresponding output ports. MIX 1 2 1516 M O N ST O MATRIX CUE L R(C) 1 2 7 8 L R MATRIX 1-8 To RACKIN PATCH To OUTPUT PATCH MATRIX INSERT OUT 1-8 MATRIX INSERT IN 1-8 CUE ON INSERT POINT POST ON INSERT OUT PRE FADER INSERT OUT PRE EQ INSERT OUT PRE EQ METER EQ OUT METER DYNA OUT PRE FADER METER METER GR METER LEVEL BAL INSERT 4BAND ATT EQ PRE EQ POST EQ PRE EQ INSERT OUT COMP COMPAND INSERT EXPAND Keyin PRE FADER INSERT OUT PRE FADER Self PRE EQ/Self POST EQ/MIX13-16 OUT/ MATRIX1-8 POST EQ (PRE FADER)PFL / (POST ON)AFL POST ON METER ON INSERT MATRIX OUT 1-8 To OUTPUT PATCH To MONITOR SELECT POST ON POST ON INSERT OUT • 4 BAND EQ (4 band equalizer) A parametric EQ with four bands: HIGH, HIGH MID, LOW MID, and LOW. • DYNAMICS 1 This is a dynamics processor that can be used as a compressor, expander, or compander. • LEVEL Adjusts the output level of the channel. • ON (On/off) Turns the output channel on or off. If this is off, the corresponding channel will be muted. 40 Reference Manual