Yamaha QL5 Reference Manual - Page 66
CH LINK SET window, Channel link operations
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4 SEND PARAMETER field If you have turned on the MIX ON, MIX SEND, MATRIX ON, or MATRIX send buttons in the LINK PARAMETER field, use the buttons in this field to specify the send-destination bus(es). MIX1-16 MTRX 1-8 MIX buses 1-16 MATRIX buses 1-8 NOTE If nothing is selected in the SEND PARAMETER field, send on/off and send level will not be linked. Channel link operations • Linking three or more channels Hold down the link-source [SEL] key and successively press the [SEL] key of each channel you want to add to the link group. • Adding a new channel to an existing link group Hold down any [SEL] key within the group and press the [SEL] key that you want to add to the group. NOTE If the link-destination channel is already assigned to another link group, its assignment to the previous group will be canceled, and it will be added to the newly assigned group. • Removing a channel from a link group Hold down any [SEL] key in the same link group, and press the [SEL] key for the channel that you want to remove. • Changing the level balance between channels that belong to the same link group While pressing and holding down the [SEL] key for the desired linked channel, adjust the parameter value. You can also remove all linked channels from the same link group temporarily. This can be helpful if you want to edit parameters that are linked to each other while maintaining the same relative level differences. For example, this may be the case for parameters such as the HA analog gain and fader. While you are holding down the [SEL] key, the HA analog gain and fader values will not be linked. (However, you cannot temporarily cancel this link during the "fading" phase of a recalled scene.) Channel Job CH LINK SET window Displayed when you press the channel display field in the CH LINK MODE window. You can also link channels in this window. 1 2 3 5 4 1 Channel select button Select a channel that you want to link. The selected channel will be indicated in blue, and the alphabetical character that indicates the link group will appear for linked channels. When selecting a channel When linking channels 2 LINK buttons Link the channel selected in 1. 3 UNLINK button Cancels the link selected in 1. 4 UNSELECT ALL De-selects all selected channels currently appearing in blue. 66 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/66.png)