Yamaha QL5 Reference Manual - Page 234
Rev+sympho., Sympho., Delay+er., One Input
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
REV+SYMPHO. One input, two output reverb and symphonic effects in parallel. Parameter REV TIME INI. DLY HI. RATIO DIFF. DENSITY REV/SYM HPF LPF FREQ. DEPTH MOD. DLY WAVE SYNC NOTE Range 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0-10 0-100% 0-100% THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU 0.05-40.00 Hz 0-100% 0.0-500.0 ms Sine, Tri OFF/ON *1 Description Reverb time Initial delay before reverb begins High-frequency reverb time ratio Spread Reverb density Reverb and symphonic balance (0% = all reverb, 100% = all symphonic) High-pass filter cutoff frequency Low-pass filter cutoff frequency Modulation speed Modulation depth Modulation delay time Modulation waveform Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ *1. REVSYMPHO. One input, two output reverb and symphonic effects in series. Parameter REV TIME INI. DLY HI. RATIO DIFF. DENSITY REV.BAL HPF LPF FREQ. DEPTH MOD. DLY WAVE SYNC NOTE Range 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0-10 0-100% 0-100% THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU 0.05-40.00 Hz 0-100% 0.0-500.0 ms Sine, Tri OFF/ON *1 Description Reverb time Initial delay before reverb begins High-frequency reverb time ratio Spread Reverb density Reverb and symphonic reverb balance (0% = all symphonic reverb, 100% = all reverb) High-pass filter cutoff frequency Low-pass filter cutoff frequency Modulation speed Modulation depth Modulation delay time Modulation waveform Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ *1. REVPAN This is a 1-in/2-out series-connected reverb and auto-pan effect. Parameter Range Description REV TIME 0.3-99.0 s Reverb time INI. DLY 0.0-500.0 ms Initial delay before reverb begins HI. RATIO 0.1-1.0 High-frequency reverb time ratio DIFF. 0-10 Spread DENSITY 0-100% Reverb density REV.BAL 0-100% Reverb and panned reverb balance (0% = all panned reverb, 100% = all reverb) HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency FREQ. 0.05-40.00 Hz Modulation speed DEPTH 0-100% Modulation depth DIR. *1 Panning direction WAVE Sine, Tri, Square Modulation waveform SYNC OFF/ON Tempo parameter sync on/off NOTE *2 Used in conjunction with TEMPO to determine FREQ *1. LR, LR, LR, Turn L, Turn R *2. DELAY+ER. One input, two output delay and early reflections effects in parallel. Parameter DELAY L DELAY R FB. DLY Range 0.0-1000.0 ms 0.0-1000.0 ms 0.0-1000.0 ms FB. GAIN -99 to +99% HI. RATIO 0.1-1.0 DLY/ER 0-100% HPF THRU, 21.2 Hz-8.00 kHz LPF 50.0 Hz-16.0 kHz, THRU TYPE S-Hall, L-Hall, Random, Revers, Plate, Spring ROOMSIZE 0.1-20.0 LIVENESS 0-10 INI. DLY 0.0-500.0 ms DIFF. 0-10 DENSITY 0-100% ER NUM. 1-19 SYNC OFF/ON NOTE L *1 NOTE R *1 NOTE FB *1 Description Left channel delay time Right channel delay time Feedback delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) High-frequency feedback ratio Delay and early reflections balance (0% = all delay, 100% = all early reflections) High-pass filter cutoff frequency Low-pass filter cutoff frequency Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Spread Reflection density Number of early reflections Tempo parameter sync on/off Used in conjunction with TEMPO to determine left channel DELAY Used in conjunction with TEMPO to determine right channel DELAY Used in conjunction with TEMPO to determine feedback DELAY *1. (Maximum value depends on the tempo setting) 15 Data List