Home » Yamaha Manuals » Audio Mixers » Yamaha QL5 » Manual Viewer

Yamaha QL5 Reference Manual - Page 203

Using GPI (General Purpose Interface), Using GPI

Get Yamaha QL5 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 203 highlights

Lit or Flash x2 blinking An abnormality has occurred on the circuit connected to the SECONDARY connector during redundant network operation. Check the circuit connected to the SECONDARY connector.  Information messages The indicators will remain lit /blinking cyclically to report the status. If the orange [SYNC] indicator is not lit, the unit is operating correctly. If the green [SYNC] indicator is not lit, the device's word clock is not defined. [SYNC] indicators Meaning Possible solution Please wait until the unit Synchronization is being synchronizes completely. performed. It may take up to 45 seconds to synchronize completely. Lit Blinking The device is operating correctly as a word clock master. This indicates that the device is operating as a word clock master. The device is operating correctly as a word clock slave. This indicates that the device is operating as a word clock slave and synching to the word clock. Lit Setup Using GPI (General Purpose Interface) The rear panel GPI (General Purpose Interface) connector can be used as an input/output connector. This connector provides five GPI IN ports and five GPI OUT ports. For example you can use an external switch to control internal parameters of the QL series console or to switch scenes. Conversely, operations or scene changes performed on the QL series console can send control signals to an external device. For details on how to send control signals to an external device when you switch scenes, refer to "Outputting a control signal to an external device in tandem with scene recall (GPI OUT)" on page 83. Using GPI IN You can use the GPI IN ports of the GPI connector to control the parameters of the QL series console from an external device. For example, you could use an external switch to turn the QL series console's Talkback on/off, operate the Tap Tempo function, or switch scenes. STEP 1. Connect an external device to the QL series console's GPI connector. 2. In the Function Access Area, press the SETUP button. 3. In the SETUP screen, press the MIDI/GPI button. 4. In the MIDI/GPI screen, press the GPI tab. 5. Specify the switch attribute and POLARITY MODE for each port as appropriate for the specifications of the external device you're using. 6. To assign the function or parameter that you want to control, press the GPI IN SETUP button. 7. In each field of the GPI IN SETUP window, select the desired function and parameter, then press the OK button. SETUP screen 203 MIDI/GPI screen Reference Manual

Section	Page
How to Use This Reference Manual	1
Contents	2
Function Tree	4
SELECTED CHANNEL section	6
Operations in the SELECTED CHANNEL section	6
Channel Strip section	11
Operations in the Channel Strip section	11
Input and output patching	14
Changing the input patch settings	15
Changing the output patch settings	16
Inserting an external device into a channel	18
Directly outputting an INPUT channel	21
Input channels	23
Signal flow for input channels	23
Specifying the channel name, icon, and channel color	24
Making HA (Head Amp) settings	26
Sending the signal from an input channel to the STEREO/MONO bus	30
Sending a signal from an input channel to a MIX/ MATRIX bus	34
Correcting delay between channels (Input Delay)	37
Channel library operations	39
OUTPUT channels	40
Signal flow for output channels	40
Specifying the channel name, icon, and channel color	41
Sending signals from MIX channels to the STEREO/ MONO bus	42
Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses	44
Correcting delay between channels (Output Delay)	46
Using the PORT TO PORT function	47
Channel library operations	48
EQ and Dynamics	49
Using EQ	49
Using dynamics	52
Using the EQ or Dynamics libraries	55
Channel Job	56
DCA group	56
Mute group	58
Using the Recall Safe function	61
Channel Link function	64
Copying, moving, or initializing a channel	67
Scene memory	71
Storing and recalling scenes	72
Editing scene memories	75
Using the Global Paste function	78
Using the Focus Recall function	80
Using the Fade function	82
Outputting a control signal to an external device in tandem with scene recall (GPI OUT)	83
Playing back an audio file that links to a scene recall	84
Using Preview mode	86
Monitor and Cue functions	87
Using the Monitor function	88
Using the Cue function	91
Talkback and Oscillator	96
Using Talkback	96
Using the Oscillator function	98
Meters	101
Operations in the METER screen	101
Graphic EQ, effects, and Premium Rack	103
About the virtual rack	103
Virtual rack operations	103
Graphic EQ operations	106
About AUTOMIXER	109
Editing the internal effects	112
Effects and tempo synchronization	117
Using the Premium Rack	119
Using the graphic EQ, effect, and Premium Rack libraries	126
I/O devices and external head amps	127
Using an I/O device	127
Remotely controlling an Rio unit	129
Remotely controlling an amp	131
Remotely controlling WIRELESS unit	132
Using an external head amp	133
Remotely controlling an external head amp	135
Controlling an internal head amp	137
MIDI	138
MIDI functionality on the QL series console	138
Basic MIDI settings	138
Using program changes to recall scenes and library items	141
Using control changes to control parameters	143
Using Parameter Changes to control parameters	145
Recorder	146
About the USB memory recorder	146
Assigning channels to the input/output of the recorder	146
Recording audio to a USB flash drive	148
Playing back audio files from a USB flash drive	150
Editing the title list	151
Recording or playing back using a computer DAW	152
Using the QL console with Nuendo Live	155
Setup	159
About the SETUP screen	159
User settings	160
Preferences	167
USER DEFINED keys	169
Functions that can be assigned to USER DEFINED keys	170
USER DEFINED knobs	173
Functions that can be assigned to USER DEFINED knobs	174
Custom fader bank	175
Console Lock	176
Saving and loading setup data to and from a USB flash drive	177
Word clock and slot settings	184
Using cascade connections	186
Basic settings for MIX buses and MATRIX buses	189
Switching the entire phantom power supply on/ off	190
Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps	190
Setting the date and time of the internal clock	191
Setting the network address	191
Setting up the Dante audio network	192
Using GPI (General Purpose Interface)	203
Help function	208
Loading a Help/text file from a USB flash drive	208
Viewing Help	208
Using USER DEFINED keys to recall Help directly	209
Other functions	210
Initializing the unit to factory default settings	210
Adjusting the detection point of the touch screen (Calibration function)	210
Adjusting the faders (Calibration function)	211
Fine-tuning the input and output gain (Calibration function)	211
Adjusting the LED color (Calibration function)	213
Adjusting the brightness of the channel name display	213
Adjusting the contrast of the channel name display	214
Initializing the Dante audio network settings	214
Warning/Error Messages	215
Index	218
Data List	220
EQ Library List	221
DYNAMICS Library List	222
Dynamics Parameters	224
Effect Type List	226
Effects Parameters	227
Premium Rack Processor Parameters	239
Parameters that can be assigned to control changes	241
NRPN parameter assignments	243
Mixing parameter operation applicability	247
MIDI Data Format	252
Input/Output Specifications	259
Electrical characteristics	260
Mixer Basic Parameters	261
Pin Assignment Chart	262

Match case Limit results 1 per page

Setup

Reference Manual

203



Information messages

The indicators will remain lit /blinking cyclically to report the status.

If the orange [SYNC] indicator is not lit, the unit is operating correctly.

If the green [SYNC] indicator is not lit, the device’s word clock is not defined.

Using GPI (General Purpose Interface)

The rear panel GPI (General Purpose Interface) connector can be used as an input/output

connector. This connector provides five GPI IN ports and five GPI OUT ports. For example

you can use an external switch to control internal parameters of the QL series console or to

switch scenes. Conversely, operations or scene changes performed on the QL series console

can send control signals to an external device.

For details on how to send control signals to an external device when you switch scenes, refer

to “

Outputting a control signal to an external device in tandem with scene recall (GPI OUT)

”

page 83

Using GPI IN

You can use the GPI IN ports of the GPI connector to control the parameters of the QL series

console from an external device. For example, you could use an external switch to turn the

QL series console’s Talkback on/off, operate the Tap Tempo function, or switch scenes.

An abnormality has occurred

on the circuit connected to the

SECONDARY connector

during redundant network

operation.

Check the circuit connected to the

SECONDARY connector.

[SYNC] indicators

Meaning

Possible solution

Synchronization is being

performed.

Please wait until the unit

synchronizes completely.

It may take up to 45 seconds to

synchronize completely.

The device is operating

correctly as a word clock

master.

This indicates that the device is

operating as a word clock master.

The device is operating

correctly as a word clock

slave.

This indicates that the device is

operating as a word clock slave

and synching to the word clock.

Flash x2

Lit or

blinking

Lit

Blinking

Lit

STEP

Connect an external device to the QL series console’s GPI connector.

In the Function Access Area, press the SETUP button.

In the SETUP screen, press the MIDI/GPI button.

In the MIDI/GPI screen, press the GPI tab.

Specify the switch attribute and POLARITY MODE for each port as appropriate for

the specifications of the external device you’re using.

To assign the function or parameter that you want to control, press the GPI IN

SETUP button.

In each field of the GPI IN SETUP window, select the desired function and parameter,

then press the OK button.

SETUP screen

MIDI/GPI screen