Yamaha QL5 Reference Manual - Page 79
OUTPUT tab, RACK tab, PATCH/OTHERs tab, DCA tab, Enables you to choose from GEQ RACK, EFFECT RACK
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
EQ DYNA1 DYNA2 MIX SEND MATRIX SEND FADER CH ON INSERT*1 INSERT PATCH*1 DIRECT OUT MIX ON MATRIX ON TO ST MONO EQ settings Dynamics 1 settings (including KEY IN SOURCE and KEY IN FILTER) Dynamics 2 settings (including KEY IN SOURCE) Send level, pan, and PRE/POST of the signal sent to a MIX bus Send level, pan, and PRE/POST of the signal sent to a MATRIX bus Fader level On/off status of [ON] keys Insert on/off status and insert point Insert in/out patch settings, head amp settings for insert-in Direct Out on/off, Direct Out level, Direct Out point and patch settings Send on/off to a MIX bus Send on/off to a MATRIX bus TO ST on/off, pan/balance settings TO MONO on/off *1. The parameters for Insert 1 and Insert 2 are selected together. • OUTPUT tab Select an output channel in the upper left area, and select its parameter in the lower left area. You can select the following parameters. ALL OUTPUT PATCH NAME EQ DYNA 1 INSERT*1 INSERT PATCH*1 FADER CH ON TO ST/BAL MONO MATRIX SEND MATRIX ON WITH SEND FROM SOURCE CHs All output channel parameters Output patch settings Channel name, icon, and channel color EQ settings Dynamics 1 settings (including KEY IN SOURCE) Insert on/off status and insert point Insert in/out patch settings, head amp settings for insert-in Fader level On/off status of [ON] keys TO ST on/off, pan/balance settings TO MONO on/off status (MIX 1-16 only) Send level, pan, and PRE/POST of the signal sent to a MATRIX bus Send on/off to a MATRIX bus SEND parameters of the send-source signal that will be sent to a channel *1. The parameters for Insert 1 and Insert 2 are selected together. • RACK tab Enables you to choose from GEQ RACK, EFFECT RACK, or PREMIUM RACK. You can individually select an GEQ for a Flex15GEQ or an effect used in dual mode. Scene memory • PATCH/OTHERs tab You can select the following parameters. INPUT PATCH OUTPUT PATCH INPUT NAME OUTPUT NAME HA CH LINK CUSTOM FADER BANK All input channel patches, insert in/out patches, Direct Out patches All output channel patches, insert in/out patches Channel names, icons, and colors for all input channels Channel names, icons, and colors for all output channels Analog gain, phantom power on/off status, Gain Compensation, phase settings Channel link settings Custom fader bank settings • DCA tab You can select either ALL or LEVEL/ON. If ALL is selected, all channel parameters will be copied. If LEVEL/ON is selected, the master level and DCA channel on/off status will be copied. You can select the copy-source items for each DCA group 1-16 individually. 79 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/79.png)