Yamaha QL5 Reference Manual - Page 70
CH DEFAULT MODE window, Initializing the parameters of a channel
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4 CLOSE button Press this button to close the window and return to the previous screen. Initializing the parameters of a channel You can restore the parameters of a channel to an initialized state. This operation can be performed on any channel(s). STEP 1. In the Function Access Area, press the CH JOB button. 2. Press the DEFAULT button in the CH JOB menu. 3. Press the [SEL] key of the channel(s) to be initialized to make it light (multiple selections are allowed). 4. Press the DEFAULT button to execute the Initialization. Function Access Area CH JOB menu NOTE After initialization, the TARGET CHs field will be empty (nothing is selected). CH DEFAULT MODE window Enables you to initialize parameters. Channel Job 1 2 3 1 TARGET CHs field Indicates the channel selected for initialization. While this window is displayed, press a [SEL] key on the top panel to select an input channel (multiple selection is allowed). The field will indicate the selected channel(s). Press the same [SEL] key once again to de-select the channel. NOTE • If you press this field while a channel is selected, all selected channels will be de-selected. • In the case of the QL1, faders that do not exist on the model will not be shown. 2 DEFAULT button After selecting the channel, press this button to execute the initialization operation. 3 CLOSE button Press this button to close the window and return to the previous screen. 70 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/70.png)