Yamaha QL5 Reference Manual - Page 157
Setup method select buttons, NO ASSIGN, SPECIFIED IP ADDRESS, DEVICE LIST, DEVICE LIST select knob
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
1 Setup method select buttons Choose one of the following methods by which to specify DVS or Dante Accelerator. • NO ASSIGN Not assigned • DVS Select a DVS from the device list • SPECIFIED IP ADDRESS .. When using Dante Accelerator, specify the IP address of the computer When setup method selection button = DVS To choose from a list of the I/O devices on the Dante audio network, press the DVS button to display the DEVICE LIST field. Recorder When setup method selection button = SPECIFIED IP ADDRESS When using Dante Accelerator, specify the IP address of the computer in the SPECIFIED IP ADDRESS field. Since the IP address of Dante Accelerator will differ from the IP address used by Yamaha Console Extension, you must specify the IP address manually. 1 2 1 DEVICE LIST Shows a list of the I/O devices on the Dante audio network. From the list, choose the DVS that you want to use with Nuendo Live. 2 DEVICE LIST select knob Use the [TOUCH AND TURN] knob to select the DVS to switch to. 1 1 IP ADDRESS knobs Use the [TOUCH AND TURN] knob to specify an IP address. NOTE • As the IP address, specify the IP address of the computer that is running Nuendo Live. • Set the address of that computer in the range of 169.254.0.0-169.254.255.255, and set the subnet mask as 255.255.0.0. • For the computer in which Dante Accelerator is installed, the Dante port of Dante Accelerator as well as the Ethernet port of the computer must both be connected to the same network. Refer to the illustration below. Computer Ethernet SW (Primary) Dante Accelerator P S QL Dante SW (Secondary) P S 157 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/157.png)