Yamaha QL5 Reference Manual - Page 32
To Stereo/mono Window, Ch1-32, Ch33-64/st In Ql5, St In Ql1, To St Pan/to St Balance Knob, Lcr Button
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6 TO ST PAN/TO ST BALANCE knob For an INPUT channel (monaural), this acts as a PAN knob that adjusts the left/right panning of signals sent to the STEREO bus. For a ST IN channel (stereo), this acts as a PAN knob, and also as a BALANCE knob that adjusts the volume of the left and right signals sent to the STEREO bus. To adjust the value, press the knob to select it, and then operate the [TOUCH AND TURN] knob. 7 Tabs Enable you to switch between windows. 8 9 Input channels TO STEREO/MONO window (CH1-32, CH33-64/ST IN (QL5), ST IN (QL1)) Adjusts the status of a signal sent from the corresponding input channel to the STEREO/ MONO bus. You can also adjust the selected pan or balance setting. 21 3 4 8 LCR button If the MODE button is set to LCR mode, this button is displayed instead of 4. This button is an overall on/off button for signals sent from a channel to the STEREO bus and MONO bus. If this button is off, no signals will be sent from the corresponding input channel to the STEREO bus or MONO bus. 9 CSR knob Adjusts the relative level of signals sent from the channel to the STEREO (L/R) bus and to the MONO (C) bus, in the range of 0-100%. To adjust the value, press the knob to select it, and then operate the [TOUCH AND TURN] knob (page 33). 1 Channel select button Selects the channel. You can select multiple channels simultaneously. 2 Σ clipping indicator Lights to indicate a signal is clipping at some point in the channel. 3 TO ST PAN/TO ST BALANCE knob Adjusts the panning or balance. To adjust the value, press the knob to select it, and then operate the [TOUCH AND TURN] knob. If the signal reaches the overload point at any meter detection point in that channel, the Σ indicator to the right of the knob will light. 4 ST/MONO indicator If a channel is set to ST/MONO mode, these indicators will individually indicate the on/ off status of signals sent from the channel to the STEREO bus/MONO bus. If that channel is set to LCR mode, the LCR indicator will be displayed in this location. The LCR indicator indicates the on/off status of all signals sent from that channel to the STEREO bus/MONO bus. 32 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/32.png)