Yamaha QL5 Reference Manual - Page 61

NOTE The [SEL] key of the channel set for Mute Safe will light, and the on-screen fader for that channel will be highlighted in green. You can cancel the Mute Safe status by pressing a lit [SEL] key once again to make it go dark. Temporarily disabling the Mute function Mute can be temporarily disabled by turning on the [ON] key; and resumed by turning it off, when you mute one of the mute groups to which that channel belongs. However, this mute control by turning on/off the [ON] key is disabled in the PREVIEW mode. Using the Recall Safe function "Recall Safe" is a function that excludes only specific parameters/channels (DCA groups) from Recall operations. Unlike the Focus Recall function (page 80), which you can apply to individual scenes, the Recall Safe settings are globally applied to all scenes. STEP 1. In the Function Access Area, press the CH JOB button. 2. Press the RECALL SAFE button in the CH JOB menu. 3. Press the [SEL] key for the channel or DCA group that will be affected by Recall Safe operations. 4. Select the target for Recall Safe operations in the SAFE PARAMETER SELECT field in the RECALL SAFE MODE window. 5. To enable Recall Safe for the selected channel, turn on the SAFE button on. (If you selected a DCA group, turn on either the LEVEL/ON button or the ALL button.) 6. To enable Recall Safe for global parameters, turn on the buttons of the GLOBAL RECALL SAFE field. 7. When you have finished making settings, press the CLOSE button to close the window. Then perform a Recall operation. Channel Job NOTE • Simply selecting a parameter in step 4 does not enable Recall Safe. To turn Recall Safe on or off, you must also perform the operation described in step 5. • Bus settings are not subject to Recall Safe. They will always be reproduced in the recalled scene. This means that if Recall Safe is enabled for one of several channels included in a link group or one of two channels set to stereo, the parameter settings of that channel may differ from those of the other channel(s). In such cases, the applicable parameter will be automatically re-linked the next time it is operated. You can globally apply Recall Safe to channel links by using the global parameter. • You can use the Recall Safe function along with the Focus Recall function (page 80). Channels or parameters that are excluded from Recall operations by either Focus or Recall Safe will not be recalled. • If you hold down the [SEL] key while performing a recall operation, all parameters of that channel will be treated as Recall Safe regardless of the state of the SAFE PARAMETER SELECT selections. RECALL SAFE MODE window 2 14 3 5 6 9 A7 0 8 1 CLEAR ALL button/SET ALL button The CLEAR ALL button turns off (disables) the Recall Safe function (that is currently set for individual channels) and the Global Recall Safe function simultaneously. The SET ALL button turns on (enables) these functions simultaneously. NOTE The parameters that would be affected by the Recall Safe function will not change. Function Access Area CH JOB menu 61 Reference Manual