Yamaha QL5 Reference Manual - Page 156
Specifying DVS or Dante Accelerator, NUENDO LIVE SETUP window
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Transport field Here you can operate the transport of Nuendo Live. 7 GO TO PROJECT START button Returns the location to the start of the project. 8 GO TO PREVIOUS MARKER button Returns the location to the previous marker. 9 GO TO NEXT MARKER button Advances the location to the next marker. 0 GO TO PROJECT END button Advances the location to the end of the project. A CYCLE button Turns repeat on/off for the project. B STOP button Stops playback/recording of the project. C PLAY button Starts playback of the project. D RECORD button Starts/stops recording of the project. E EASY RECORDING button Immediately starts recording on all tracks. When you press this, the location will move to the last-recorded position, all tracks will be set to record mode, recording will begin, the record panel will be displayed, and the panel will be locked. The recording will be started retrospectively. (Initial setting: 10 seconds) F Record lock button Turns recording status lock on/off. This prevents recording from being accidentally stopped during recording. G DVS information display Shows the device label of the selected DVS. H ADD MARKER button Adds a marker to the project at the current location. I RECALL LINK button Specifies whether a marker will be created when you recall a scene. If this function is turned on, the button will be lit. NOTE Transport functions can also be controlled from USER DEFINED keys (page 169). Recorder Specifying DVS or Dante Accelerator Before you proceed, use DANTE SETUP to specify the I/O devices that will be mounted. For details, refer to "Mounting an I/O device on the Dante audio network" on page 197. STEP 1. In the Nuendo Live screen, press the NUENDO Live SETUP button. 2. In the NUENDO LIVE SETUP window, press the setting method select button. 3. Use the [TOUCH AND TURN] knob to make settings. 4. When you have finished making settings, press the OK button to close the window. NOTE • You can specify either DVS or Dante Accelerator in the NUENDO LIVE SETUP window. • However, do not select the same DVS or Dante Accelerator from multiple QL series consoles. NUENDO LIVE SETUP window In this window, specify the device that the console will use for communication when working with Nuendo Live. 1 156 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/156.png)