Yamaha QL5 Reference Manual - Page 90

2 DIMMER field Enables you to make settings for the Dimmer function, which temporarily attenuates monitor signals. • DIMMER LEVEL knob Adjusts the amount by which the monitor signals will be attenuated when the dimmer is on. • DIMMER ON button Switches the Dimmer function on or off. The monitor signal will be attenuated if this button is on. 3 TALKBACK DIMMER field Enables you to make settings for the Dimmer function, which temporarily attenuates monitor signals when TALKBACK is on. • TALKBACK DIMMER LEVEL knob Adjusts the amount by which the monitor level will be attenuated when talkback is on. • TALKBACK DIMMER ON indicator Indicates the on/off status of the dimmer function for talkback. 4 PHONES LEVEL LINK button Enables you to link the signal level at the PHONES Out jack to the monitor signal level. If this button is on, the MONITOR FADER LEVEL knob and monitor fader will adjust the level of the signal sent to the PHONES OUT jack. 5 CUE INTERRUPTION button Press this button to interrupt the monitor signal by the cue signal. If this button is on and the cue is enabled, the cue signal will be sent to the monitor output. With the factory default settings, this function is turned on. If you do not wish to send the cue signal to the monitor output, switch this button off. 6 MONO MONITOR button Turn on this button to switch the monitor output signal to mono. 7 MONITOR OUTPUT button Switches the monitor output on or off. Monitor and Cue functions 8 MONITOR FADER field Enables you to set and view the monitor fader that adjusts the monitor level. • MONITOR FADER LEVEL knob Adjusts the monitor fader level. You can use the [TOUCH AND TURN] knob to adjust the monitor level. • FADER ASSIGN display This area displays the type of faders that are currently assigned as MONITOR FADER. Indicator assignments are as follows. ---MASTER A MASTER A+ MASTER B MASTER B+ CUSTOM CUSTOMs No assignment MASTER A fader only MASTER A, as well as MASTER B fader and Custom fader bank MASTER B fader only MASTER B, as well as Custom fader bank One of the Custom fader bank faders Multiple Custom fader bank faders 9 MONITOR DELAY field This field enables you to specify the monitor delay setting by which the monitor out signal is delayed. • AUTO BYPASS button Turn this on to automatically bypass monitor delay when the cue is on. • MONITOR DELAY knob Adjusts the delay time for the monitor signal. The delay time is shown above the knob in ms units, and below the knob in units of the currently-selected scale. However if the scale is set to ms, the delay time value is not shown above the knob. If you press this knob, you can use the [TOUCH AND TURN] knob to adjust the value. • MONITOR DELAY ON button If this button is on, the monitor signal will be delayed according to the setting of the MONITOR DELAY knob. 90 Reference Manual