Yamaha QL5 Reference Manual - Page 89

4 MONITOR FADER field Enables you to set and view the monitor fader that adjusts the monitor level. • MONITOR FADER LEVEL knob Adjusts the monitor fader level. • FADER ASSIGN display This area displays the type of faders that are currently assigned to the monitor fader. Indicator assignments are as follows No assignment • MASTER A Master A only • MASTER A Master A, Master B, Custom fader bank • MASTER B Master B only • MASTER B Master B, Custom fader bank • CUSTOM A single fader in the Custom fader bank • CUSTOMs Multiple faders in the Custom fader bank 5 Meter field Indicates the output level of Monitor Out channels L, R, and C. Press this field to open the MONITOR window. 6 MONITOR OUTPUT button Switches the Monitor Output on or off. 7 PHONES LEVEL LINK button If this is on, the MONITOR FADER LEVEL knob or MONITOR FADER will adjust the level of signals sent to the PHONES Out jack. 8 MONO MONITOR button Turn on this button to switch monitor signals to mono. Monitor and Cue functions MONITOR window You can make detailed settings for monitoring. This screen appears when you press the MONITOR display button or the meter field in the MONITOR screen. 1 23 456 7 0 A 89 1 SOURCE SELECT field Select one of the following as the signal source that will be output to the MONITOR bus. STEREO L/R STEREO L/R channel signals MONO (C) MONO channel signal LCR STEREO L/R + MONO channel signals INPUT 25-26-31-32*1 INPUT jacks 25-32*2 signals (per two channels) PB OUT Recorder's PLAYBACK OUT signals DEFINE The signal(s) selected in the ASSIGN field LINK Links the monitor source with the MIX/MATRIX bus selected in SENDS ON FADER mode. *1. QL1: 9-10-15-16 *2. QL1: 9-16 89 Reference Manual