Home » Yamaha Manuals » Audio Mixers » Yamaha QL5 » Manual Viewer

Yamaha QL5 Reference Manual - Page 204

Using GPI OUT, MIDI/GPI screen GPI

Get Yamaha QL5 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 204 highlights

NOTE • With latched operation, the function will switch between active and inactive each time a trigger is input from the external switch. In this case, we recommend that you use a non-locking type of external switch. • With unlatched operation, the function will be active only while the signal from the external switch is at the high level or low level. In this case, you may use either a non-locking or a locking type of external switch as appropriate for your needs. • Settings in the GPI page of the MIDI/GPI screen are common to all scenes. They can be saved as SETUP data. MIDI/GPI screen (GPI page) 4 1 2 3 Setup 3 POLARITY MODE select button This button selects the polarity of the GPI IN port Low active) When operating an on/off-type parameter, it will become active when the switch is grounded High active) When operating an on/off-type parameter, it will become active when the switch is opened or when a high-level voltage is input. 4 GPI IN SETUP button The button shows the name of the currently-selected function or parameter. Press this button to display the GPI IN SETUP window. 1 GPI IN status indicator This indicates the status of the voltage being input to the GPI IN port. 2 Switch attribute select button This button selects the switch attribute. Each time you press the button, its indication will alternate between LATCH and UNLATCH LATCH (a switch that alternately turns on/off each time it is pressed) is selected. UNLATCH (a switch that is on only while pressed and is off when released) is selected. NOTE The items that can be selected in the GPI IN SETUP window are the same as for the USER DEFINED keys (page 169). Using GPI OUT The GPI OUT ports of the GPI OUT connector allow you to control an external device by performing operations on the QL series console. STEP 1. Connect an external device to the QL series console's GPI connector. 2. In the Function Access Area, press the SETUP button. 3. In the SETUP screen, press the MIDI/GPI button. 4. In the MIDI/GPI screen, press the GPI tab. 5. Specify the POLARITY MODE for each port as appropriate for the specifications of the external device you're using. 6. To assign a function or parameter that you want to control, press the GPI OUT SETUP button. 7. In each field of the GPI OUT SETUP window, select the desired function and parameter, then press the OK button. 204 Reference Manual

Section	Page
How to Use This Reference Manual	1
Contents	2
Function Tree	4
SELECTED CHANNEL section	6
Operations in the SELECTED CHANNEL section	6
Channel Strip section	11
Operations in the Channel Strip section	11
Input and output patching	14
Changing the input patch settings	15
Changing the output patch settings	16
Inserting an external device into a channel	18
Directly outputting an INPUT channel	21
Input channels	23
Signal flow for input channels	23
Specifying the channel name, icon, and channel color	24
Making HA (Head Amp) settings	26
Sending the signal from an input channel to the STEREO/MONO bus	30
Sending a signal from an input channel to a MIX/ MATRIX bus	34
Correcting delay between channels (Input Delay)	37
Channel library operations	39
OUTPUT channels	40
Signal flow for output channels	40
Specifying the channel name, icon, and channel color	41
Sending signals from MIX channels to the STEREO/ MONO bus	42
Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses	44
Correcting delay between channels (Output Delay)	46
Using the PORT TO PORT function	47
Channel library operations	48
EQ and Dynamics	49
Using EQ	49
Using dynamics	52
Using the EQ or Dynamics libraries	55
Channel Job	56
DCA group	56
Mute group	58
Using the Recall Safe function	61
Channel Link function	64
Copying, moving, or initializing a channel	67
Scene memory	71
Storing and recalling scenes	72
Editing scene memories	75
Using the Global Paste function	78
Using the Focus Recall function	80
Using the Fade function	82
Outputting a control signal to an external device in tandem with scene recall (GPI OUT)	83
Playing back an audio file that links to a scene recall	84
Using Preview mode	86
Monitor and Cue functions	87
Using the Monitor function	88
Using the Cue function	91
Talkback and Oscillator	96
Using Talkback	96
Using the Oscillator function	98
Meters	101
Operations in the METER screen	101
Graphic EQ, effects, and Premium Rack	103
About the virtual rack	103
Virtual rack operations	103
Graphic EQ operations	106
About AUTOMIXER	109
Editing the internal effects	112
Effects and tempo synchronization	117
Using the Premium Rack	119
Using the graphic EQ, effect, and Premium Rack libraries	126
I/O devices and external head amps	127
Using an I/O device	127
Remotely controlling an Rio unit	129
Remotely controlling an amp	131
Remotely controlling WIRELESS unit	132
Using an external head amp	133
Remotely controlling an external head amp	135
Controlling an internal head amp	137
MIDI	138
MIDI functionality on the QL series console	138
Basic MIDI settings	138
Using program changes to recall scenes and library items	141
Using control changes to control parameters	143
Using Parameter Changes to control parameters	145
Recorder	146
About the USB memory recorder	146
Assigning channels to the input/output of the recorder	146
Recording audio to a USB flash drive	148
Playing back audio files from a USB flash drive	150
Editing the title list	151
Recording or playing back using a computer DAW	152
Using the QL console with Nuendo Live	155
Setup	159
About the SETUP screen	159
User settings	160
Preferences	167
USER DEFINED keys	169
Functions that can be assigned to USER DEFINED keys	170
USER DEFINED knobs	173
Functions that can be assigned to USER DEFINED knobs	174
Custom fader bank	175
Console Lock	176
Saving and loading setup data to and from a USB flash drive	177
Word clock and slot settings	184
Using cascade connections	186
Basic settings for MIX buses and MATRIX buses	189
Switching the entire phantom power supply on/ off	190
Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps	190
Setting the date and time of the internal clock	191
Setting the network address	191
Setting up the Dante audio network	192
Using GPI (General Purpose Interface)	203
Help function	208
Loading a Help/text file from a USB flash drive	208
Viewing Help	208
Using USER DEFINED keys to recall Help directly	209
Other functions	210
Initializing the unit to factory default settings	210
Adjusting the detection point of the touch screen (Calibration function)	210
Adjusting the faders (Calibration function)	211
Fine-tuning the input and output gain (Calibration function)	211
Adjusting the LED color (Calibration function)	213
Adjusting the brightness of the channel name display	213
Adjusting the contrast of the channel name display	214
Initializing the Dante audio network settings	214
Warning/Error Messages	215
Index	218
Data List	220
EQ Library List	221
DYNAMICS Library List	222
Dynamics Parameters	224
Effect Type List	226
Effects Parameters	227
Premium Rack Processor Parameters	239
Parameters that can be assigned to control changes	241
NRPN parameter assignments	243
Mixing parameter operation applicability	247
MIDI Data Format	252
Input/Output Specifications	259
Electrical characteristics	260
Mixer Basic Parameters	261
Pin Assignment Chart	262

Match case Limit results 1 per page

Setup

Reference Manual

204

NOTE

•

With latched operation, the function will switch between active and inactive each time a trigger is

input from the external switch. In this case, we recommend that you use a non-locking type of

external switch.

•

With unlatched operation, the function will be active only while the signal from the external switch

is at the high level or low level. In this case, you may use either a non-locking or a locking type

of external switch as appropriate for your needs.

•

Settings in the GPI page of the MIDI/GPI screen are common to all scenes. They can be saved

as SETUP data.

MIDI/GPI screen (GPI page)

GPI IN status indicator

This indicates the status of the voltage being input to the GPI IN port.

Switch attribute select button

This button selects the switch attribute. Each time you press the button, its indication

will alternate between LATCH and UNLATCH.

.................

LATCH (a switch that alternately turns on/off each time it is pressed)

is selected.

.................

UNLATCH (a switch that is on only while pressed and is off when

released) is selected.

POLARITY MODE select button

This button selects the polarity of the GPI IN port.

.....................

(Low active) When operating an on/off-type parameter, it will

become active when the switch is grounded.

.....................

(High active) When operating an on/off-type parameter, it will

become active when the switch is opened or when a high-level

voltage is input.

GPI IN SETUP button

The button shows the name of the currently-selected function or parameter. Press this

button to display the GPI IN SETUP window.

NOTE

The items that can be selected in the GPI IN SETUP window are the same as for the USER

DEFINED keys (

page 169

Using GPI OUT

The GPI OUT ports of the GPI OUT connector allow you to control an external device by

performing operations on the QL series console.

STEP

Connect an external device to the QL series console’s GPI connector.

In the Function Access Area, press the SETUP button.

In the SETUP screen, press the MIDI/GPI button.

In the MIDI/GPI screen, press the GPI tab.

Specify the POLARITY MODE for each port as appropriate for the specifications of

the external device you’re using.

To assign a function or parameter that you want to control, press the GPI OUT

SETUP button.

In each field of the GPI OUT SETUP window, select the desired function and

parameter, then press the OK button.