Yamaha QL5 Reference Manual - Page 94
CUE window, CLEAR CUE button, CUE MODE buttons, INPUT CUE field, DCA CUE field
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6 CLEAR CUE button Cancels all cue selections simultaneously. If MIX CUE mode has been selected, all of the selected channels will be cleared. CUE window You can make detailed settings for the cue. This screen appears when you press the INPUT/ DCA/OUTPUT CUE field. 1 2 34 5 6 7 8 9 1 CUE MODE buttons Select one of the following two cue modes: • MIX CUE All selected channels will be mixed and auditioned. • LAST CUE Only most recently selected channel will be auditioned. 2 INPUT CUE field This field enables you to make settings related to the input channel cue. • Cue point select button Sets the cue point to PFL (before the fader (immediately before INPUT DELAY)), AFL (immediately after the fader), or POST PAN (immediately after PAN). NOTE Be aware that if you turn on the POST PAN button, you will be unable to monitor signals sent to the MONO bus from an input channel in LCR mode. • PFL TRIM knob Specifies the monitor levels when PFL is selected. You can use the [TOUCH AND TURN] knob to adjust the level. Monitor and Cue functions 3 DCA CUE field This section enables you to make settings related to DCA cue. • Cue point select button Sets the cue point for the DCA group to PRE PAN (immediately before PAN) or POST PAN (immediately after PAN). • DCA TRIM knob Indicates the monitor level of cue signals from a DCA group. You can use the [TOUCH AND TURN] knob to adjust the level. • UNITY button Turn on this button to monitor signals at the same volume level that was obtained when the master level for each DCA group was set to 0 dB (unity gain). 4 OUTPUT CUE field This section enables you to make settings related to output channel cue. • Cue point select button Sets the cue point for the output channel to PFL (immediately before fader) or AFL (immediately after fader). • PFL TRIM knob Indicates the monitor levels when PFL is selected. If you press this knob, you can use the [TOUCH AND TURN] knob to adjust the level. 94 Reference Manual