Yamaha QL5 Reference Manual - Page 197

Mounting an I/O device on the Dante audio network Here's how to select which of the multiple I/O devices on the Dante audio network will be mounted so that they can be used. Up to 24 units can be mounted for one QL series console. STEP 1. Press the DEVICE MOUNT tab in the lower part of the DANTE SETUP window. 2. Press the I/O device select button. 3. In the DEVICE SELECT window, press the setup method select button. 4. Use the [TOUCH AND TURN] knob to make settings. 5. When you have finished making settings, press the OK button to close the window. DANTE SETUP window (DEVICE MOUNT page) 12 Setup 3 I/O device select buttons Press one of the buttons to open the DEVICE SELECT window. The upper line of the button shows the device label. The lower line of the button shows the model name and the number of inputs and outputs. If no device has been mounted, the upper row will indicate "---" and the lower row will show nothing. For more information on VIRTUAL/CONFLICT/DUPLICATE shown below these buttons, refer to 1 on page 127, "I/O device list." DANTE SETUP window 1 3 1 CLEAR ALL button Clears all I/O devices in the list to an unmounted state. 2 REFRESH button Updates the displayed list of I/O devices on the Dante audio network. 1 Setup method select buttons Choose one of the following methods for mounting the I/O device. • NO ASSIGN Not mounted • DEVICE LIST Select and mount from the device list • SUPPORTED DEVICE ....... Select and mount a supported device • DVS Enter a device label and mount (only for DVS) • MANUAL Enter a device label and mount 197 Reference Manual