Home » Yamaha Manuals » Audio Mixers » Yamaha QL5 » Manual Viewer

Yamaha QL5 Reference Manual - Page 231

DYNA.PHASER, HQ.PITCH, DUAL PITCH, TREMOLO, Two input, two output tremolo effect.

Get Yamaha QL5 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 231 highlights

 DYNA.PHASER Two input, two output dynamically controlled phaser. Parameter Range SOURCE INPUT, MIDI SENSE 0-100 DIR. UP, DOWN DECAY *1 OFFSET 0-100 FB.GAIN -99 to +99% STAGE LSH F LSH G HSH F HSH G 2, 4, 6, 8, 10, 12, 14, 16 21.2 Hz-8.00 kHz -12.0 to +12.0 dB 50.0 Hz-16.0 kHz -12.0 to +12.0 dB Description Control source: input signal or MIDI Note On velocity Sensitivity Upward or downward frequency change Decay speed Lowest phase-shifted frequency offset Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Number of phase shift stages Low shelving filter frequency Low shelving filter gain High shelving filter frequency High shelving filter gain *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz)  HQ.PITCH One input, two output high-quality pitch shifter. Parameter PITCH FINE DELAY Range -12 to +12 semitones -50 to +50 cents 0.0-1000.0 ms FB. GAIN -99 to +99% MODE SYNC NOTE 1-10 OFF/ON *1 Description Pitch shift Pitch shift fine Delay time Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Pitch shift precision Tempo parameter sync on/off Used in conjunction with TEMPO to determine DELAY *1. (Maximum value depends on the tempo setting)  DUAL PITCH Two input, two output pitch shifter. Parameter PITCH 1 FINE 1 Range -24 to +24 semitones -50 to +50 cents LEVEL 1 -100 to +100% PAN 1 DELAY 1 L63 to R63 0.0-1000.0 ms FB. G 1 -99 to +99% MODE PITCH 2 FINE 2 1-10 -24 to +24 semitones -50 to +50 cents LEVEL 2 -100 to +100% PAN 2 DELAY 2 L63 to R63 0.0-1000.0 ms FB. G 2 -99 to +99% SYNC NOTE 1 NOTE 2 OFF/ON *1 *1 Description Channel #1 pitch shift Channel #1 pitch shift fine Channel #1 level (plus values for normal phase, minus values for reverse phase) Channel #1 pan Channel #1 delay time Channel #1 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Pitch shift precision Channel #2 pitch shift Channel #2 pitch shift fine Channel #2 level (plus values for normal phase, minus values for reverse phase) Channel #2 pan Channel #2 delay time Channel #2 feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback) Tempo parameter sync on/off Used in conjunction with TEMPO to determine Channel #1 delay Used in conjunction with TEMPO to determine Channel #2 delay *1. (Maximum value depends on the tempo setting)  TREMOLO Two input, two output tremolo effect. Parameter Range FREQ. 0.05-40.00 Hz DEPTH 0-100% WAVE Sine, Tri, Square SYNC OFF/ON NOTE *1 LSH F 21.2 Hz-8.00 kHz LSH G -12.0 to +12.0 dB EQ F 100 Hz-8.00 kHz EQ G -12.0 to +12.0 dB EQ Q 10.0-0.10 HSH F 50.0 Hz-16.0 kHz HSH G -12.0 to +12.0 dB Description Modulation speed Modulation depth Modulation waveform Tempo parameter sync on/off Used in conjunction with TEMPO to determine FREQ Low shelving filter frequency Low shelving filter gain EQ (peaking type) frequency EQ (peaking type) gain EQ (peaking type) bandwidth High shelving filter frequency High shelving filter gain *1. 12 Data List

Section	Page
How to Use This Reference Manual	1
Contents	2
Function Tree	4
SELECTED CHANNEL section	6
Operations in the SELECTED CHANNEL section	6
Channel Strip section	11
Operations in the Channel Strip section	11
Input and output patching	14
Changing the input patch settings	15
Changing the output patch settings	16
Inserting an external device into a channel	18
Directly outputting an INPUT channel	21
Input channels	23
Signal flow for input channels	23
Specifying the channel name, icon, and channel color	24
Making HA (Head Amp) settings	26
Sending the signal from an input channel to the STEREO/MONO bus	30
Sending a signal from an input channel to a MIX/ MATRIX bus	34
Correcting delay between channels (Input Delay)	37
Channel library operations	39
OUTPUT channels	40
Signal flow for output channels	40
Specifying the channel name, icon, and channel color	41
Sending signals from MIX channels to the STEREO/ MONO bus	42
Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses	44
Correcting delay between channels (Output Delay)	46
Using the PORT TO PORT function	47
Channel library operations	48
EQ and Dynamics	49
Using EQ	49
Using dynamics	52
Using the EQ or Dynamics libraries	55
Channel Job	56
DCA group	56
Mute group	58
Using the Recall Safe function	61
Channel Link function	64
Copying, moving, or initializing a channel	67
Scene memory	71
Storing and recalling scenes	72
Editing scene memories	75
Using the Global Paste function	78
Using the Focus Recall function	80
Using the Fade function	82
Outputting a control signal to an external device in tandem with scene recall (GPI OUT)	83
Playing back an audio file that links to a scene recall	84
Using Preview mode	86
Monitor and Cue functions	87
Using the Monitor function	88
Using the Cue function	91
Talkback and Oscillator	96
Using Talkback	96
Using the Oscillator function	98
Meters	101
Operations in the METER screen	101
Graphic EQ, effects, and Premium Rack	103
About the virtual rack	103
Virtual rack operations	103
Graphic EQ operations	106
About AUTOMIXER	109
Editing the internal effects	112
Effects and tempo synchronization	117
Using the Premium Rack	119
Using the graphic EQ, effect, and Premium Rack libraries	126
I/O devices and external head amps	127
Using an I/O device	127
Remotely controlling an Rio unit	129
Remotely controlling an amp	131
Remotely controlling WIRELESS unit	132
Using an external head amp	133
Remotely controlling an external head amp	135
Controlling an internal head amp	137
MIDI	138
MIDI functionality on the QL series console	138
Basic MIDI settings	138
Using program changes to recall scenes and library items	141
Using control changes to control parameters	143
Using Parameter Changes to control parameters	145
Recorder	146
About the USB memory recorder	146
Assigning channels to the input/output of the recorder	146
Recording audio to a USB flash drive	148
Playing back audio files from a USB flash drive	150
Editing the title list	151
Recording or playing back using a computer DAW	152
Using the QL console with Nuendo Live	155
Setup	159
About the SETUP screen	159
User settings	160
Preferences	167
USER DEFINED keys	169
Functions that can be assigned to USER DEFINED keys	170
USER DEFINED knobs	173
Functions that can be assigned to USER DEFINED knobs	174
Custom fader bank	175
Console Lock	176
Saving and loading setup data to and from a USB flash drive	177
Word clock and slot settings	184
Using cascade connections	186
Basic settings for MIX buses and MATRIX buses	189
Switching the entire phantom power supply on/ off	190
Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps	190
Setting the date and time of the internal clock	191
Setting the network address	191
Setting up the Dante audio network	192
Using GPI (General Purpose Interface)	203
Help function	208
Loading a Help/text file from a USB flash drive	208
Viewing Help	208
Using USER DEFINED keys to recall Help directly	209
Other functions	210
Initializing the unit to factory default settings	210
Adjusting the detection point of the touch screen (Calibration function)	210
Adjusting the faders (Calibration function)	211
Fine-tuning the input and output gain (Calibration function)	211
Adjusting the LED color (Calibration function)	213
Adjusting the brightness of the channel name display	213
Adjusting the contrast of the channel name display	214
Initializing the Dante audio network settings	214
Warning/Error Messages	215
Index	218
Data List	220
EQ Library List	221
DYNAMICS Library List	222
Dynamics Parameters	224
Effect Type List	226
Effects Parameters	227
Premium Rack Processor Parameters	239
Parameters that can be assigned to control changes	241
NRPN parameter assignments	243
Mixing parameter operation applicability	247
MIDI Data Format	252
Input/Output Specifications	259
Electrical characteristics	260
Mixer Basic Parameters	261
Pin Assignment Chart	262

Match case Limit results 1 per page

Data List



DYNA.PHASER

Two input, two output dynamically controlled phaser.



HQ.PITCH

One input, two output high-quality pitch shifter.



DUAL PITCH

Two input, two output pitch shifter.



TREMOLO

Two input, two output tremolo effect.

Parameter

Range

Description

SOURCE

INPUT, MIDI

Control source: input signal or MIDI Note On velocity

SENSE

0–100

Sensitivity

DIR.

UP, DOWN

Upward or downward frequency change

DECAY

*1.

6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz)

Decay speed

OFFSET

0–100

Lowest phase-shifted frequency offset

FB.GAIN

–99 to +99%

Feedback gain (plus values for normal-phase feedback, minus values for

reverse-phase feedback)

STAGE

2, 4, 6, 8, 10, 12, 14, 16

Number of phase shift stages

LSH F

21.2 Hz–8.00 kHz

Low shelving filter frequency

LSH G

–12.0 to +12.0 dB

Low shelving filter gain

HSH F

50.0 Hz–16.0 kHz

High shelving filter frequency

HSH G

–12.0 to +12.0 dB

High shelving filter gain

Parameter

Range

Description

PITCH

–12 to +12 semitones

Pitch shift

FINE

–50 to +50 cents

Pitch shift fine

DELAY

0.0–1000.0 ms

Delay time

FB. GAIN

–99 to +99%

Feedback gain (plus values for normal-phase feedback, minus values for

reverse-phase feedback)

MODE

1–10

Pitch shift precision

SYNC

OFF/ON

Tempo parameter sync on/off

NOTE

*1.

(Maximum value depends on the tempo setting)

Used in conjunction with TEMPO to determine DELAY

Parameter

Range

Description

PITCH 1

–24 to +24 semitones

Channel #1 pitch shift

FINE 1

–50 to +50 cents

Channel #1 pitch shift fine

LEVEL 1

–100 to +100%

Channel #1 level (plus values for normal phase, minus values for reverse

phase)

PAN 1

L63 to R63

Channel #1 pan

DELAY 1

0.0–1000.0 ms

Channel #1 delay time

FB. G 1

–99 to +99%

Channel #1 feedback gain (plus values for normal-phase feedback, minus

values for reverse-phase feedback)

MODE

1–10

Pitch shift precision

PITCH 2

–24 to +24 semitones

Channel #2 pitch shift

FINE 2

–50 to +50 cents

Channel #2 pitch shift fine

LEVEL 2

–100 to +100%

Channel #2 level (plus values for normal phase, minus values for reverse

phase)

PAN 2

L63 to R63

Channel #2 pan

DELAY 2

0.0–1000.0 ms

Channel #2 delay time

FB. G 2

–99 to +99%

Channel #2 feedback gain (plus values for normal-phase feedback, minus

values for reverse-phase feedback)

SYNC

OFF/ON

Tempo parameter sync on/off

NOTE 1

*1.

(Maximum value depends on the tempo setting)

Used in conjunction with TEMPO to determine Channel #1 delay

NOTE 2

Used in conjunction with TEMPO to determine Channel #2 delay

Parameter

Range

Description

FREQ.

0.05–40.00 Hz

Modulation speed

DEPTH

0–100%

Modulation depth

WAVE

Sine, Tri, Square

Modulation waveform

SYNC

OFF/ON

Tempo parameter sync on/off

NOTE

*1.

Used in conjunction with TEMPO to determine FREQ

LSH F

21.2 Hz–8.00 kHz

Low shelving filter frequency

LSH G

–12.0 to +12.0 dB

Low shelving filter gain

EQ F

100 Hz–8.00 kHz

EQ (peaking type) frequency

EQ G

–12.0 to +12.0 dB

EQ (peaking type) gain

EQ Q

10.0–0.10

EQ (peaking type) bandwidth

HSH F

50.0 Hz–16.0 kHz

High shelving filter frequency

HSH G

–12.0 to +12.0 dB

High shelving filter gain