Yamaha QL5 Reference Manual - Page 69

Moving the parameters of a channel The settings of a specific input channel can be moved to a different input channel. When you execute a Move operation, the numbering of the channels between the move-source and move-destination will move forward or backward by one. Move 1 2 3 4 5 1 5 2 3 4 Move by one. You can move settings between the following combinations of channels. • Between input channels • Between ST IN channels STEP 1. In the Function Access Area, press the CH JOB button. 2. Press the MOVE button in the CH JOB menu. 3. Press a [SEL] key to select the move-source channel. 4. Press the [SEL] key for the move-destination channel. 5. To execute the move, press the MOVE button. CH MOVE MODE window Channel Job 1 2 3 4 1 SOURCE CH field Displays the move-source channel. While this window is displayed, press a [SEL] key on the top panel to select an input channel. The selected channel will be highlighted in this field. If you want to re-select the move-source channel, press this field. 2 DESTINATION CH field Displays the move-destination channel. When you specify the move-source, you can then select the move-destination input channel by pressing its [SEL] key on the panel. When the move-destination channel is selected, this field will be highlighted. If you want to defeat the selected move-destination channel, press the DESTINATION CH field. Function Access Area CH JOB menu NOTE In the case of the QL1, faders that do not exist on the model will not be shown. 3 MOVE button Executes a move operation. After selecting the move-source channel and move-destination channel, the channel settings move from the move-source to the move-destination. The settings of all channels between the move-source and move-destination will shift toward the move-source by one channel. 69 Reference Manual