Yamaha QL5 Reference Manual - Page 9

 EQ graph field This field graphically indicates the approximate response of the EQ. Press this field to open the HPF/EQ 1ch window, in which you can set the attenuator, HPF, and EQ.  DYNAMICS 1/DYNAMICS 2 field This field enables you to set the Dynamics 1/2 parameters. 1 2 3 4 1 OVER indicator Warns you when the signal is clipping. 2 Level meter Displays the output signal level (green) and the amount of gain reduction (orange) when the Dynamics is on. The current threshold setting is shown as a white vertical line. 3 Threshold Specifies the threshold. 4 Parameters Indicate the values of parameters that vary depending on the currently-selected dynamics type. Press this field to open the DYNAMICS 1/DYNAMICS 2 1ch window, in which you can make detailed parameter settings. SELECTED CHANNEL section  INSERT field This field enables you to make insert settings. 1 1 Popup button Press this button to open the INSERT/DIRECT OUT 1ch 2 window. 2 ON button 3 4 Switches the insert on or off. 3 RACK EDIT button Appears if an effect or Premium Rack is inserted. Press this button to display the edit screen for the inserted rack. 4 IN indicator Appears if a port has been assigned to the insert-in patch. It lights when the signal is sent to the insert-in.  DIRECT OUT field This field enables you to make Direct Out settings. 1 Popup button Press this button to open the INSERT/DIRECT OUT 1ch window. The Direct Out level value will appear below the 1 2 button. 2 ON button Switches the Direct Out on or off.  RECALL SAFE field This field enables you to make Recall Safe settings. 1 1 Popup button 3 Press this button to open the RECALL SAFE window. 2 ON button 2 Switches the Recall Safe status on or off. 3 PARTIAL indicator This will light if recall safe applies only to some of the parameters, not to all channel settings. 9 Reference Manual