Yamaha QL5 Reference Manual - Page 33
Signal level when LCR mode is selected, When the CSR knob is set to 0% ST IN channel stereo
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Signal level when LCR mode is selected If LCR mode is selected, the signal level sent to the STEREO (L/R) bus and MONO (C) bus will vary according to the settings of the CSR knob and the TO ST PAN knob. When the CSR knob is set to 0% (INPUT channel (monaural)) The TO ST PAN knob operates as a conventional PAN knob, and no signal is sent to the MONO (C) bus. Signal level Signal sent to the STEREO (L) bus Signal sent to the STEREO (R) bus L C R TO ST PAN knob When the CSR knob is set to 0% (ST IN channel (stereo)) The TO ST BALANCE knob operates as a conventional BALANCE knob, and no signal is sent to the MONO (C) bus. Signal sent from the STEREO (L) channel to the STEREO (L) bus Signal level L C R TO ST BALANCE knob Signal sent from the STEREO (R) channel to the STEREO (R) bus When the CSR knob is set to 100% Input channels Signal level Signal sent to the MONO (C) bus Signal sent to the STEREO (L) bus Signal sent to the STEREO (R) bus L C R TO ST PAN knob When the CSR knob is set to 100% (ST IN channel) Signal sent from the ST IN (L) channel to the MONO (C) bus Signal level Signal sent from the ST IN (L) channel to the STEREO (L) bus L C R TO ST BALANCE knob Signal level Signal sent from the ST IN (R) channel to the MONO (C) bus Signal sent from the ST IN (R) channel to the STEREO (R) bus L C R TO ST BALANCE knob Signal level L C R TO ST BALANCE knob 33 Reference Manual
![](/manual_guide/products/yamaha-ql5-reference-manual-f6aaad0/33.png)